-
(Difference between revisions)
Line 1: Line 1: ==Gibson Les Paul Standard 2010 Limited====Gibson Les Paul Standard 2010 Limited==- [[Image:Gibson_Les_Paul_Standard_2010_Limited_123601361_lg4.jpg|thumb|right]]+ [[Image:Gibson_Les_Paul_Standard_2010_Limited_123601361_lg4.jpg|thumb]][http://www2.gibson.com/Products/Electric-Guitars/Les-Paul/Gibson-USA/Les-Paul-Standard-2010-Limited.aspx Les Paul Standard 2010 Limited][http://www2.gibson.com/Products/Electric-Guitars/Les-Paul/Gibson-USA/Les-Paul-Standard-2010-Limited.aspx Les Paul Standard 2010 Limited]Revision as of 01:39, 17 November 2010
Contents
Gibson Les Paul Standard 2010 Limited
Les Paul Standard 2010 Limited
Description
The Les Paul Standard 2010 Limited
Technology aside, it’s a top-flight Les Paul in the traditional sense, too, yet with a plethora of custom upgrades befitting its Limited status. Constructed with a Grade-AA flamed maple top, Grade-A chambered mahogany back, and one-piece mahogany neck, the Les Paul Standard 2010 Limited offers classic Les Paul tonewoods, combined with a look that’s exclusive to this run of only 400 guitars.
A unique new Fireball finish with dark ’burst edges graces its top, while its back, neck and sides are dressed in a deep Vintage Sunburst with a dark cherry center and dark edges. Like several of Gibson USA’s models of years past, the Les Paul Standard 2010 Limited’s fast, slim ’60s profiled neck carries a dark Grade-A ebony fingerboard with block inlays, while its headstock wears a chrome truss rod cover and a Les Paul designation. Quite simply, there has never been a Les Paul like it — and once they are gone, there never will be again.
All Les Paul Standard 2010 Limited’s include an owner’s manual, two batteries and an independent charger, and come protected in a Limited Edition plush-lined, white, hardshell case with plated emblem.
Specs
Body Top Maple Back Mahogany Binding 1 pc Black (Inside) 1pc White (Outside) Body Type Chambered Adhesive Franklin Titebond Neck Species Mahogany Profile Slim 60's Profile Neck Joint Angle 5° (+/- 15 seconds) Truss Rod Traditional Adjustable Adhesive Franklin Titebond Neck Fit Joint Mortise & Tenon Adhesive Franklin Titebond 50 Joint Angle Tolerance +/- .005" Fingerboard Species Ebony Frets 22 Nut/E.O.B 1.695 / 2.260 Binding White Inlays White Acrylic Blocks Nut Material Black Tefzell Width 1.695 Slots Gibson PLEK System Headstock Inlay Mother of Pearl Logo Gibson Logo Inlay with Scripted "Limited Edition" Silkscreen Truss Rod Cover Chrome Bell with Scripted "Les Paul" Tuners Model Robot Tuners™ Tuning Ratio Capable of changing the frequency by 5 halftones per second Gear Type Stepper motor Plating Black Bridge Type Piezo Bridge Material Zamak Plating Chrome Tailpiece Type Robot Stop Bar Material Zamak Plating Chrome Hardware Knobs 2 Black Top hats with "Bridge Volume" and "Neck Volume" inserts, 1 Black Speed knob for Tone, 1 MCK. Pickguard 5ply with P-90 & Humbucker cut Toggle Switch 3-way Toggle with Piezo Blend Strap Buttons Dunlop Straplocks Pickups Neck Position P-90 H Bridge Position Burstbucker 3 Magnet Material Neck: Alnico V; Bridge: Alnico II Electronics Master-Control-Knob (MCK) Full Color LED Control Center for Dialing-in Multiple Tunings, Sound and Pickup Coil Selection. Potentiometers Lead and Rhythm Volume Type 300k Linear Coil Wiring Machine Wound Peak Voltage 750v Range 0-300k Frequency Curve User-definable Active Gain Stage LP-Z High Defination Impedance Circuit Jack Plate Chrome LP-Z Finish Color Fireball Sealer Nitrocellulose Lacquer Process 1-1.5 mils Case Type Les Paul 2010 Limited Case Exterior White Vinyl Case Interior Plush Grey Accessories Accessory Pack 2 Batteries and Charger Manuals Gibson Owner's Manual with Warranty Information
Images
-
Meta
